BASIC

Description

m5stackbasic

M5Stack BASIC Kit, like its namesake, is a starter kit among the M5Stack development kit series. It’s a modular, stackable, scalable, and portable device which is powered with an ESP-32 core, which makes it open source, low cost, full-function, and easy for developers to handle new product development on all stages including circuit design, PCB design, software, mold design and production. This Basic kit provides a friendly price and full-featured resources which makes it a good starter kit for you to explore IoT.

If you want to explore the fastest way of IoT prototyping, M5Stack development board is the perfect solution. Not like others, M5Stack development board is highly efficient, covered with industrial grade case and ESP32-based development board. It integrates with Wi-Fi & Bluetooth modules and contains a dual-core and 16MB of SPI Flash . Together with 30+ M5Stack stackable modules , 40+ extendable units and different levels of program language, you can create and verify your IoT product in a very short time.

Supportive development platforms and programming languages: Arduino, Blockly language with UIFlow, Micropython. Regardless of what level programming skill you have, M5Stack would guide you in every step of the way to realize your idea as well as to the final productlization. e If you ever played with ESP8266, you would realize that ESP32 is a perfect upgrade out of ESP8266. In comparison, ESP32 has more GPIOs, more analog inputs and two analog outputs, multiple extra peripherals( like a spare UART ). Official developing platform ESP-IDF has transplanted with FreeRTOS. With dual-core and real time OS you can get more organized code and much high speed processor.

Pin description of myCobot eletricIO

Features

  • ESP32-based
  • Built-in Speaker, Buttons,Color LCD, Power/Reset button
  • TF card slot (16G Maximum size)
  • Magnetic suction at back
  • Extendable Pins & Holes
  • M-Bus Socket & Pins
  • Program Platform: UIFlow, MicroPython, Arduino

Applications

  • Internet of things terminal controller
  • Stem education product
  • DIY creation
  • Smart home equipment

Parameters

Resources Parameter
ESP32 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash Memory 16MB
Power Input 5V\@ 500mA
Port TypeC x 1, GROVE(I2C+I/0+UART) x 1
Core Bottom Port PIN (G1,G2,G3,G16, G17, G18, G19, G21, G22, G23, G25, G26, G35, G36)
IPS Screen 2 inch, 320x240 Colorful TFT LCD, ILI9342C, max brightness 853nit
Button Custom button x 3
Battery 110mAh\@ 3.7V
Antenna 2.4G 3D Antenna
Operating Temperature 32°F to 104°F ( 0°C to 40°C )
Net weight 47.2g
Gross weight 93g
Product Size 54 x 54 x 18mm
Package Size 95 x 65 x 25mm
Case Material Plastic ( PC )

LCD & TF card

LCD :320x240 TF card Maximum size 16GB

ESP32 Chip GPIO23 GPIO19 GPIO18 GPIO14 GPIO27 GPIO33 GPIO32 GPIO4
ILI9342C MOSI/MISO / CLK CS DC RST BL
TF MOSI MISO CLK CS

Button

ESP32 Chip GPIO39 GPIO38 GPIO37 GPIO25
Button Pin BUTTON A BUTTON B BUTTON C /

GROVE Port A & IP5306

ESP32 Chip GPIO22 GPIO21 5V GND
GROVE A SCL SDA 5V GND
IP5306 SCL SDA 5V GND

IP5306 charging/discharging,Voltage parameter

charging discharging
0.00~ 3.40V -> 0% 4.20~ 4.07V -> 100%
3.40~ 3.61V -> 25% 4.07~ 3.81V -> 75%
3.61~ 3.88V -> 50% 3.81~ 3.55V -> 50%
3.88~ 4.12V -> 75% 3.55~ 3.33V -> 25%
4.12~ / -> 100% 3.33~ 0.00V -> 0%

ESP32 ADC/DAC

ADC1 ADC2 DAC1 DAC2
8 channels 10 channels 2 channels 2 channels
G32-39 G0/2/4/12-15/25-27 G25 G26

Charging current measured value

charging current Fully charged current(Power OFF) Fully charged current(Power ON)
0.55A - 0.066A

Datasheet

API

pcba


results matching ""

    No results matching ""